DV479

 25ML Due to the content of titanium particles, this extremely strong industrial strength epoxy is suitable for bonding virtually all metals and their alloys, as well as many other non-metallic products. It starts to bind after 5 minutes. After one hour, the object to be glued can be moved, and it obtains full strength after 4 hours. The hardening time is longer at temperatures below 13 ° C. Do not use above 93 ° C.
\n
\nHow to use: A special type of dispenser allows for easy, quick and extremely thorough mixing of two components: resin and hardener. Break off the tip of the syringe and squeeze out the desired amount of glue, then retract the syringe plunger to prevent further leakage of the epoxy. Mix thoroughly with a spatula and apply to a previously prepared surface. Wipe the tip of the syringe clean after use. Note: Close the tip of the syringe only one and the same way, avoiding mixing of one component with the other."