G030

50ML Ceramic coating is currently known in the world as the most durable form of protection for paintwork and other surfaces. It ensures the highest protection level and much higher hardness than the hardest varnishes. After use on the paintwork surface it builds a transparent and invisible layer 2-3 microns thick, thanks to which the paintwork is completely isolated from the effects of all external.
\n
\nK2 GRAVON protects the surface from scratches, dirt, UV rays, grit salt, bird droppings, rains and tree sap, remnants of insects, corrosion and mechanical damages, caused for example by stone hits.
\n
\nIt also protects against the appearance of gloss reducing defects, especially circular scratches. Thanks to the ceramic coating, there is no need to wax the vehicle. Furthermore, due to the excellent dirt repulsion and selfcleaning properties the need for vehicle wash can be also reduced. Directions
\nOptimum application conditions:
\n
\nSurface temperature between 10-35°C.
\nApply indoors or in shaded areas.
\nDo not apply in excessive humidity conditions.
\nSurface preparation:
\n
\nClean and thoroughly dry the paintwork.
\nThe paintwork surface should be free of tar, dirt, waxes, oils and original manufacturer protection. Use K2 CLAY BAR to remove any residual dirt in microelements of the paintwork.
\nPaint defects and scratches should be polished, e.g. using a polishing machine and K2 LUSTER polishing pastes.
\nApplication:
\n
\nBefore applying the ceramic coating thoroughly degrease the paintwork using K2 KLINET degreaser and K2 BONA microfibre.
\nShake the bottle well and apply 6-8 drops to a dry wipe covering the applicator.
\nApply with criss-cross motion on a surface no larger than 50x50cm for at a time.
\nLet the coating work for 1-2 minutes in a temperature of app. 20°C, then polish the surface with a microfiber cloth (a higher temperature will shorten the drying time, a lower temperature will increase it). Do not allow the coating to dry on the paintwork.
\nAfter finishing the first coat, wait for at least 1 hour and then apply the next layer (for the max. hardness it’s recommended to apply 3 layers).
\nOptionally, after finishing the last coat, K2 GRAVON RELOAD can be applied for additional glide and colour depth.
\nAfter use:
\n
\nLeave the car preferably indoors in a dry place for min. 8 hours.
\nDo not wash the car with any chemical compounds for the next 7 days.
\nFor regular coating maintenance (every 3-6 months), it is recommended to use K2 GRAVON RELOAD.
\nThe kit contents: K2 Gravon 50 ml
\nApplicator 1 pc
\nApplicator wipes 5 pcs
\nMicrofiber cloth 1 pc"